There is a new version of WiFi coming soon that ought to solve some of the major problems with using WiFi in the home and in busy environments. The new standard has been labeled as 802.11ax and should start shipping in new routers by the end of this year and start appearing in devices in early 2018.
It’s the expected time for a new standard since there has been a new one every four or five years. 802.11a hit the market in 1999, 802.11g in 2003, 802.11n in 2009 and 802.11ac in 2013.
One of the most interesting thing about this new standard is that it’s a hardware upgrade and not a real change in the standards. It will be backwards compatible with earlier versions of 802.11, but both the router and the end devices must be upgraded to use the new standard. This means that business travelers are going to get frustrated when visiting hotels without the new routers.
One improvement is that the new routers will treat the 2.4 GHz and 5 GHz spectrums as one big block of spectrum, making it more likely to find an open channel. Most of today’s routers make you pick one band or the other.
Another improvement in 801.11ax is that the routers will have more antennas in the array, making it possible to connect with more devices at the same time. It’s also going to use MIMO (multiple input, multiple output) antenna arrays, allowing it to identify individual users and to establish fixed links to them. A lot of the problems in current WiFi routers come when routers get overwhelmed with more requests for service than the number of antennas that are available.
In addition to more signal paths the biggest improvement will be that the new 801.22ax routers will be able to better handle simultaneous requests for use of a single channel. The existing 802.11 standards are designed to share spectrum and when a second request is made to use a busy channel, the first transmission is stopped while the router decides which stream to satisfy – and this keep repeating as the router bounces back and forth between the two users. This is not a problem when there are only a few requests for simultaneous use, but in a crowded environment the constant stopping and starting of the router results in a lot of the available spectrum going unused and in nobody receiving a sustained signal.
The new 802.11ax routers will use OFDMA (orthogonal frequency division multiplying) to allow multiple users to simultaneously use the same channel without the constant stopping and starting at each new request for service. A hotel with a 100 Mbps backbone might theoretically be able to allow 20 users to each receive a 5 Mbps stream from a single WiFi channel. No wireless system will be quite that efficient, but you get the idea. A router with 802.11ax can still get overwhelmed, but it takes a lot more users to get to that condition.
We’ll have to wait and see how that works in practice. Today, if you visit a busy business hotel where there might be dozens of devices trying to use the bandwidth, the constant stopping and starting of the WiFi signal usually results in a large percentage of the bandwidth not being given to any user – it’s lost during the on/off sequences. But the new standard will give everybody an equal share of the bandwidth until all of the bandwidth is used or until it runs out of transmitter antennas.
The new standard also allows for scheduling connections between the router and client devices. This means more efficient use of spectrum since the devices will be ready to burst data when scheduled. This will allow devices like cellphones to save battery power by ‘resting’ when not transmitting since they save on making unneeded requests for connection.
All these various changes also mean that the new routers will use only about one-third the energy of current routers. Because the router can establish fixed streams with a given user it can avoid the constant off/off sequences.
The most interesting downside to the new devices will be that their biggest benefits only kick in when most of the connected devices are using the new standard. This means that the benefits on public networks might not be noticeable for the first few years until a significant percentage of cellphones, tablets, and laptops have been upgraded to the new standard.
Well defined article with enough of the information one can require to develop a knowledge about the concept. I have liked the initiative that has been taken for the discussion of such an important topic.