We are so surrounded by fiber optic technology today that it’s easy to forget what a relatively new technology this is. We’ve gone from theoretical paper to the world covered with fiber optic lines in only fifty years.
As is usual with most modern inventions, Kao and Hockman were not the only ones looking for a way to use lasers for communications. Bell Labs had considered using fiberglass but abandoned the idea due to the huge attenuation they saw in glass – meaning that the laser light signal scattered quickly and wouldn’t travel very far. Bell Labs was instead looking at shooting lasers through hollow metal tubes using focused lenses.
The big breakthrough was when Kao and Hockman found a way to reduce the attenuation within a fiberglass cable to less than 20 decibels per kilometer. At that level of attenuation they could overcome irregularities and impurities in the fiber cable.
It took a decade for the idea to be put to practical use and Corning Glass Works (now Corning Inc.) found ways to lower attenuation even more; they laid the first fiber optic cable in Torino, Italy in 1977.
We didn’t see any wide-spread use of fiber optics in the U.S. until the early 1980s. AT&T and a few other companies like the budding MCI began installing fiber as an alternative to copper for long-haul networks.
We’ve come a very long way since the first generation fiber installations. The glass was expensive to manufacture, and so the early fiber cables generally did not contain very many strands of glass. It was not unusual to see 6 and 8 strand fibers being installed.
Compared to today’s standards, the fiber produced in the 1980s into the early 1990s was dreadful stuff. Early fiber cables degraded over time, mostly due to microscopic cracks introduced into the cable during manufacturing and installation. These cracks grew over time and eventually caused the cables to become cloudy and unusable. Early splicing technologies were also a problem and each splice introduced a significant amount of interference into the fiber run. I doubt that there is much, if any, functional fiber remaining from those early days.
But Corning and other companies have continually improved the quality of fiber optic cable and today’s fiber is lightyears ahead of the early cables. Splicing technology has also improved and modern splices introduce very little interference into the transmission path. In fact, there is no good estimate today of how long a properly-installed fiber cable might last in the field. It’s possible that fiber installed today might still be functional 75 to 100 years from now. The major issues with the life of fiber today is no longer failure of the glass sheath, but rather the damage that is done to fibers over time due to fiber cuts and storm damage.
The speeds achieved in modern fiber optics are incredible. The newly commissioned undersea fiber that Google and others built between Japan and the west coast of the US can pass an incredible 60 Terabits per second of data. Improvements in laser technology have grown probably even faster than the improvements in fiber glass manufacturing. We’ve grown to where fiber optic cable is taken for granted as something that is reliable and relatively easy to install and use. We certainly would be having a very different discussion about broadband today had fiber optic cables not improved quickly over the last several decades.