Categories
Technology

US Telcos Indifferent to G.Fast

Speed_Street_SignG.Fast is a new technology that can deliver a large swath of broadband over copper wires for a short distance. The technology uses some of the very high frequencies that can travel over copper, much in the same way that DSL does for lower frequencies.

The International Telecommunication Union (ITU) just approved the final standard for the technology with the G.9701 standard for “Fast Access to Subscriber Terminals.” Several vendors including Alcatel-Lucent and Huawei have been producing and testing units in various field trials.

British Telecom has done a number of these tests. The largest such test was started in August for 2,000 customers in Huntingdon, Cambridgeshire. During the trial they are offering customers speeds of 330 Mbps, but they expect at the end of the trial to be able to raise this to about 500 Mbps.

The technology involves building fiber along streets and then using the existing copper drops to bring the bandwidth into the home. This is the most affordable kind of fiber construction because a telco can overlash fiber onto its existing copper wires on the poles. That means very little make-ready work, no permits needed, and no impediments to quick construction. This kind of fiber construction can literally be done at half of the cost faced by other fiber overbuilders.

British Telecom has done a number of trials across the country. Alcatel-Lucent has also done trials with Telkom Austria. But for the most part American telcos have shown no interest in the technology. The only real trial here that I’ve read about is a trial with CenturyLink in Las Vegas.

And I frankly don’t understand the reluctance. G.Fast is a halfway solution on the way to a full fiber deployment. As cable companies and overbuilders like Google are stepping up deployment of gigabit speeds, either through fiber or through fast cable modems using DOCSIS 3.1, the telcos have been announcing fiber builds to remain competitive. AT&T has announced gigabit fiber builds in more than twenty markets. CenturyLink says it will be passing 700,000 homes with fiber in 2016.

So why wouldn’t an American telo seriously consider G.Fast? With capabilities up to 500 Mbps in real-world applications it gives them a product that can compete well with other fast technologies. And by overlashing the fiber to deploy G.Fast the telco will have tackled one of the major costs of building an FTTP network, by getting the fiber deep into the network. And with G.Fast a telco can avoid the expensive fiber drops and electronics which are the most expensive part of a FTTP network for them.

I could envision somebody like CenturyLink building fiber to the more lucrative parts of town while deploying G.Fast to older copper neighborhoods. This would give them a far greater fast broadband coverage, making it easier and more cost effective to advertise their broadband.

But it seems like most of the US telcos just want out of the copper business. And so, rather than take this as an opportunity to milk another decade out of their copper networks before finally building fiber, they seem prepared to cede even more broadband customers to the cable companies. That has me scratching my head. The cable companies have clearly accepted that their entire future is as ISPs and that data is the only real product that will matter in the future. It just seems that the large telcos have not quite yet come to this same conclusion.

Exit mobile version