The vast majority of the customers covered by the FCC statement are served by cable companies using hybrid fiber-coaxial technology. I don’t believe that cable companies are widely delivering upload speeds greater than 25 Mbps upload. I think the FCC has the story partly right. I think cable companies tell customers that the broadband products they buy have upload speeds of 25 Mbps, and the cable company’s largely report these marketing speeds on Form 477.
But do cable companies really deliver 25 Mbps upload speeds? One of the services my consulting firm provides is helping communities conduct speed tests. We’ve done speed tests in cities recently where only a tiny fraction of customers measured upload speeds greater than 25 Mbps on a cable HFC network.
It’s fairly easy to understand the upload speed capacity of a cable system. The first thing to understand is the upload capacity based upon the way the technology is deployed. Most cable systems deploy upload broadband using the frequencies on the cable system between 5 MHz and 42 MHz. This is a relatively small amount of bandwidth that sits at the noisiest part of cable TV frequency. I remember back to the days of analog broadcast TV and analog cable systems when somebody running a blender or a microwave would disrupt the signals on channels 2 through 5 – the cable companies are now using these same frequencies for uploading broadband. The DOCSIS 3.0 specification assigned upload broadband to the worst part of the spectrum because before the pandemic almost nobody cared about upload broadband speeds.
The second factor affecting upload speeds is the nature of the upload requests from customers. Before the pandemic, the upload link was mostly used to send out attachments to emails or backup data on a computer into the cloud. These are largely temporary uses of the upload link and are also considered non-critical – it didn’t matter to most folks if a file was uploaded in ten seconds or five minutes. However, during the pandemic, all of the new uses for uploading require a steady and dedicated upload data stream. People now are using the upload link to connect to school servers, to connect to work servers, to take college classes online, and to sit on video call services like Zoom. These are critical applications – if the upload broadband is not steady and sufficient the user loses the connection. The new upload applications can’t tolerate best effort – a connection to a school server either works or it doesn’t.
The final big factor that affects the bandwidth on a cable network is demand. Before the pandemic, a user had a better chance than today of hitting 25 Mbps upload because they might have been one of a few people trying to upload at any given time. But today a lot of homes are trying to make upload connections at the same time. This matters because a cable system shares bandwidth both in the home, but also in the neighborhood.
The upload link from a home can get overloaded if more than one person tries to connect to the upload link at the same time. Homes with a poor upload connection will find that a second or a third user cannot establish a connection. The same thing happens at the neighborhood level – if too many homes in a given neighborhood are trying to connect to upload links, then the bandwidth for the whole neighborhood becomes overloaded and starts to fail. Remember a decade ago that it was common for downloaded videos streams to freeze or pixelate in the evening when a lot of homes were using broadband? The cable companies have largely solved the download problem, but now we’re seeing neighborhoods overloading on upload speeds. This results in people unable to establish a connection to a work server or being booted off a Zoom call.
The net result of the overloaded upload links is that the cable companies cannot deliver 25 Mbps to most homes during the times when people are busy on the upload links. The cable companies have ways to fix this – but most fixes mean expensive upgrades. I bet that the cable companies are hoping this problem will magically go away at the end of the pandemic. But I’m guessing that people are going to continue to use upload speeds at levels far higher than before the pandemic. Meanwhile, if the cable companies were being honest, they would not be reporting 25 Mbps upload speeds to the FCC. (Just typing that made me chuckle because it’s not going to happen.)
3 replies on “The Upload Speed Lie”
I’m curious what you see across companies. In Saint Paul, I’m on Comcast “gigabit” and am supposed to get 35 Mbps up. I frequently do – I often max at 40 Mbps but almost always above 25 Mbps.
We see two things. In some cities everybody gets good speeds, and in others the speeds are far less. I recently looked at a Comcast markets where over half of homes were getting download speeds under 100 Mbps and upload speeds considerably under 25 Mbps. But I looked at another city where people were getting 115% on average of advertised speeds. We also often see that speeds vary by neighborhood, with some parts of a city with great speeds and others at something slower – indicating old network design issues that never got upgraded.
I have Spectrum’s middle tier service (400D/20U) and routinely get above those speeds on speed tests. My usual results are typically around 480 down and 22-23 up. Spectrum typically over provisions around 20%.